Results 1 to 4 of 4

Thread: QL for Perennium parts

  1. #1

    Question QL for Perennium parts

    Ive searched the forums and cant find an answer on what QL of parts are used to make perennium guns. The guides I have found state that the parts must be within 80% of the nano rifle but what about higher QL parts on a lower ql nano rifle??

    Does the rifle have to be within 80% of the parts used if the parts are higher?

  2. #2
    AFAIK, having parts higher than the rifle is not an issue. You could use ql200 parts on a ql50 Rifle with no problems.

    You would still only get a ql50 Perennium though.
    Jaqueme Advisor of Red Tigers, RK1
    Joeylegs

    Red Tigers Homepage

  3. #3

  4. #4
    And it's a little different. Not all parts have to be 80%+ of the gun. The hacked gun sets the final QL. The spiritech apparatus and the bolts have to be 80%+ of the gun - just use the !oe function of your orgbot or ask helpbot. The perennium sheet has to be 80%+ of the spiritech apparatus. So the lowest QLs you can use for a ql200 gun:
    ql200 nano charges weap
    ql160 spiritech
    ql160 bolts
    ql128 sheet
    Luuv lvl220/19/67 NM engie equip
    Spamheal lvl205/23 NM doc equip
    You might not believe it possible, but not all my toons are in my signature! *gasp*
    And yes, I always edit my posts.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •